Ever since I was a little boy I have had a fascination with the electro-mechanical from steam works to electronics and to robotics. I am always thinking of new things to make/build.
OG (Original) ‘Bot
This was the first creation that was spawned by this parts which stood out from the rest. You can look at thousands of parts and at times, they come together to form a unique figure. This was the first creation that screamed to come out of my brain and materialize into what you see before you. All the parts were scavenged from scraps and drilled together to form this Bot. It has a 9Volt battery to power the lights and a toggle switch to turn it ON and OFF.
Electro Tester
This Bot was built to help me do my work faster and more efficiently. It has a connection and switches to run 110Volts to test leads and also a 24Volt transformer to test leads. My testing required to verify that 24 Volts where present on the output of the units, so I wired the eyes to function on 24 Volts. So, if the unit output was good, then the eyes would light up. If not, then they would stay off. When working with power you need to have fuses to protect your equipment and this bot has one fuse per line. This Bot was not only my most useful creation, but also the most requested by my co-workers.
Impact Bug
After coming across this a couple of Impact Sprinklers I noticed the top section looked like the top read area of a bug and so, the Impact Bug was born. This Bug is powered by a 3Volt battery attached to a toggle switch to power the eyes. This became a great gift idea for co-workers who were moving along after their contracts where up.
Music ‘Bot
The evolution of the OG ‘Bot after about 8 different variations in style. This ‘Bot was a present for a co-workers birthday and it went to a good home.
Robot Hand
This hand/arm was built for a Science Fair project for a co-worker. He wanted to build a hand that could grip an empty soda can and lift it. After some deliberation and some research on the internet, the Robot Hand was born. Each finger can move independently from the others or all together by pulling on all 5 wires at once. The springs for finger joints help the fingers to straighten up while the double string on the thumb allowed up to not only pick an empty can, but also a full can of soda and hold it while all 5 wires where being pulled on.
These are a few of my creations.
By EPEngineer
